PANAM ENGINEERS has been in the field of manufacturing precision TUBE FITTINGS and INSTRUMENTATION VALVES since the last two decades. With a team of dedicated engineers PANAM has always endeavored to satisfy their customers ever widening demands with unmatched precision.
 




CHECK VALVES 
 
PANAM Check Valves are specially designed & manufactured for flow control of fluides and gases in corrosive & hazardous environment. These valves are used in Peocess control, instrumentation and flow control applications.
 
Valves are precision machined with designer durability and maximum efficiency to provide high quality and low cost alternatives in fluid and gaseous control systems of different applications, to meet the exact standards of our customers growing demands


Features:
  • Available in High Grade Stainless Steel, Bass materials
  • Variety of end connections includes Male / Female threaded NPT, BSP, BSPT, ISO, DIN and JIS tapeed pipe ends.
  • 100% factory tested for both crack & reseal
  • Complete Heat Traceability
Pressure / Temperature Ratings:
Pressure Rating
  • 316SS – 1/8” to 3/4"- 5000 psig CWP (345 bar)
  • 1” – 3000 psig CWP (207 bar)
  • Brass – 1/8” to 1” – 3000 psig CWP (207 bar)
Working Temperatures
  • Viton seal -15° F to 375° F (-26°C to 190°C)
  • Fluorocarbon Rubber -15° F to 400° F (-26°C to 204°C)
  • Buna – N Rubbe -30° F to 275° F (-34°C to 135°C)
  • Neoprene Rubber -45° F to 250° F (-43°C to 121°C)
Orifice: 1.078" to 0.656" (2.0mm to 16.7mm)
 
Cv Factor: 0.18 to 6.56
 


Working - Choice of fixed pressure cracking points from 1/3 to 25 psi (.02 to 1.75 bar) or as per customers requirements. Valves may initially crack at higher than subsequent cracking pressure if are not actuated for a period of time.


Female x Female
PCV-X-S-FF
Male x Male
PCV-X-S-MM
OD x OD
PCV-X-S-ODT

   Price List        Common Technical Profile